![]() ![]() Then, type “ services.msc” and click on “ OK“.ģ. You have to set the NetBIOS helper service to automatically start.Ģ. Fix 5 – Restart the TCP/IP NetBIOS Helper After that, again click on “ OK” to save the settings.Īfter that, close the Network & Connection settings. Then, click on “ OK” to save the default settings.ĩ. After that, click on the radio button beside the “ Disable NETBIOS over TCP/IP” option.Ĩ. Now, you need to go to the “ WINS” section.ħ. After that, click on the “ Advanced” settings to modify it.Ħ. To modify “ Internet Protocol Version 4(TCP/IPv4), “ double click on it.ĥ. Now, you need to right-click on your network adapter and then click on “ Properties“.Ĥ. The Network Connections window will open up.ģ. You have to disable the NET BIOS and TCP/IP settings so that WOL can work properly.Ģ.Just write “ ncpa.cpl” and then click on “ OK“. After that, just restart the system to let this change take effect. Then, set the ‘Value:’ to “ 10 Mbps First“. Finally, click on the “ WOL & Shutdown Link Speed“.ġ2. Set the ‘Value:’ to “ Enabled” from the drop-down.ġ1. After that, select the “ Wake on a pattern match” property.ġ0. Same way, set the “ Wake on Magic Packet” to the “ Enabled” setting.ĩ. In the box, scroll down and select the option “ Shutdown Wake-On-Lan“.Ĩ. Then, right-click on the network device (usually the Ethernet driver), and click on “ Properties“.Ħ. When the Run opens up, type “ devmgmt.msc“. Right-click on the Windows icon and click on the “ Run“.Ģ. If the previous tweak didn’t solve the issue, you have to toggle the WOL settings manually.ġ. Fix 2 – Turn Off Link State Power Managementġ – Search Edit Power Plan in Windows search box and click on Edit power plan icon from the search result.Ģ – Now, Select change advanced power settings Try to wake up the remote computer with a WOL request. Then, click on “ Apply” and “ OK” to save these modifications.Īfter that, close the Device Manager window. Only allow a magic packet to wake the computerħ.Allow the computer to turn off this device to save power.Make sure that these three options are checked. Now, go to the “ Power Management” section.Ħ. After that, right-click on the network card this device is using, and then click on the “ Properties“.ĥ. When the Device Manager window appears, expand the “ Network adapters” section.Ĥ. Fix 10 – Disable the Link State Power Managementġ.Fix 6 – Make sure the AC power is plugged in.Fix 5 – Restart the TCP/IP NetBIOS Helper.Fix 2 – Turn Off Link State Power Management.Fix 1 – Allow power usage in Sleep mode. ![]()
0 Comments
Leave a Reply. |